Mauch 002: PL-100 Sensor Board with CFK enclosure
The MAUCH 002 PL-100 Sensor Board with CFK Enclosure is a high-quality sensor board designed for UAV power management. This sensor board is manufactured by MAUCH Electronics, known for its unparalleled electronics for UAV power management. The PL-100 sensor board is enclosed in a CFK enclosure for protection and durability.
The HS boards are based on the famous Allegra ACS758 hall current sensors, ACS758-050U for the 50A version, ACS758-100U for the 100A version and ACS758-200U for the 200A version. The electronic on the board is powered by an independent 4.0V LDO (LP2985-4.0) and the offset shifting is realized by an OP from Microchip (MCP601) specially designed for microprocessors analog inputs.
The sensor board is only installed into the “positive” (red) main wire from the LiPo, the “negative “black” wire stays untouched, which reduces the risk of short circuits on the sensor board.
The voltage measurement, has an installed filter which reduces the risk of false RTL trigger, which might be happened if we fly in very windy conditions due to sudden motor speed up to keep the flight leveled.
Details
Features:
- 100A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U.
- Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.
- This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.
- Connected to the sensor are 2x10cm AWG12 wire (red) as a standard.
- REM: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400)
- Without CFK enclosure = 27.5 x 19.5 x 10.5mm / 17g (with 2x 10cm 12AWG)
- With CFK enclosure = 43.5 x 23.0 x 15mm / 22g (with 2x 10cm 12AWG)